| |
Megol Hydraulikoel HL 46
HL hydraulic oils are mineral oils that are used as pressure fluids in hydraulic systems. They contain
active ingredients to increase ageing resistance, anti-corrosive properties. As a result of these
additives they satisfy all requirements and are primarily used in hydraulic systems in which high
thermal stresses occur, corrosion can form due to water and whose pumps or hydraulic motors
require oil types with wear protection agents for mixed friction as a result of the operating conditions.
Approvals / Specifications:HL 46 DIN 51524 Part 1
Characteristic data |
|
|
Approx. values |
ISO viscosity class |
DIN 51519 |
|
VG 46 |
Viscosity at 0°C |
DIN 51562 |
mm2/s |
600 |
Viscosity at 40°C |
DIN 51562 |
mm2/s |
46 |
Viscosity at 100°C |
DIN 51562 |
mm2/s |
6.7 |
Viscosity index |
DIN ISO 2909 |
|
97 |
Density at 15°C |
DIN 51757 |
kg/m3 |
880 |
Flash point |
DIN ISO 2592 |
°C |
226 |
Pour point |
DIN ISO 3016 |
°C |
-24 |
Ash, oxide |
DIN EN 7 |
g/100 g |
<0.01 |
Coke residue using the |
|
|
|
Conradson method with ash |
DIN 51551 |
g/100 g |
0.07 |
Content of asphaltenes |
DIN 51595 |
g/100 g |
m.n.n. *) |
Content of undissolved substances |
DIN 51592 |
g/100 g |
m.n.n. *) |
Water content |
DIN ISO 3733 |
g/100 g |
m.n.n. *) |
Neutralisation index, acid |
DIN 51558 Part 1 |
mg KOH/g |
0.2 |
Corrosive effect on stee |
DIN 51585 |
degree of corrosion |
0-A |
|
|
